Einbau-Digital-Decoder | Gauge H0 - Article No. 74460

Digital Installation Decoder.

b
Digital Installation Decoder.
Digital Installation Decoder.

Most Important Facts

Article No.74460
Gauge / Design type H0 / 1:87
KindC-Gauge
ManualsCompact viewCopy link
Article not produced anymore.
Check with your local dealer
Find Dealer
  • Product description

    This decoder can be retrofitted to all C Track turnouts with an electric mechanism. Electrical connections are made with plug contacts. An address of 1 to 256 can be set with coding switches.

    A digital decoder can be installed along with the electric mechanism for turnouts or can be installed later. The decoder is easily connected to the turnout mechanism with plug contacts and can be given its own address (addresses 1 to 256). Tools are special knowledge are not required for this installation. The digital power supply can be taken directly from the power present in the turnout for operating trains. This gives you a finished digital turnout that is also immediately ready to use on temporary layouts.

    Tip: The 24630 three-way turnout uses 2 of the no. 74490 electric mechanism, and a 6083 / 60830 digital decoder installed outside of this turnout must be used to convert it to digital operation.

  • Publications

    - Product programme 2000 / 2001 - Product programme 2001 / 2002 - Product programme 2002 / 2003 - Product programme 2003/2004 - Product programme 2005 - Product programme 2006 - Product programme 2007/2008 - Product programme 2008/2009 - Product programme 2009/2010 - Product programme 2010/2011

Warning

ATTENTION: not for children under 3 years