Gauge H0 - Article No. 4256

Commuter Car.

Prototype: German Federal Railroad (DB) "Silberling" type Bnb 719. 2nd class.

pjU4{
Commuter Car.
Commuter Car.

Most Important Facts

Article No.4256
Gauge / Design type H0 / 1:87
EraIV
KindPassenger Cars
Spare parts listOrder spare partsCompact viewCopy link
Article not produced anymore.
Check with your local dealer
Find Dealer
  • Product description

    Model: The car has adjustable buffers. The car is ready for installation of 7319 current-conducting couplings or 72020 current-conducting couplers. Length over the buffers 26.4 cm / 10-3/8".
    DC wheel set 4 x 70 0580.

  • Publications

    - Product programme 2000 / 2001 - Product programme 2001 / 2002 - Product programme 2002 / 2003 - Product programme 2003/2004 - Product programme 2005 - Product programme 2006
  • Prototype information

    The unpainted exterior skin of stainless steel with the peacock"s eye pattern under the windows gave the German Federal Railroad commuter cars, which replaced older rolling stock starting in 1960, the name "Silberlinge" ("Silver Coins").In the prototype a large number of 2nd class cars were equipped with baggage and engineer's compartments at one end, which were later expanded to a complete engineer's cab with destination signs. Thanks to the engineer's cab, these cars can be used in push/pull service with locomotives equipped for this type of operation. This saves the time required to turn locomotives at the end stations. On main lines and branch lines, trains of Silberlinge often run with class 111, 140, 141, 212 or 216 locomotives. The modern, three-phase class 120 locomotive also occasionally pulls a push/pull train. Recently, Silberlinge have been replaced on lightly traveled routes increasingly with the new class 628 powered rail cars. In urban areas, however, they are still often seen, even in S-Bahn traffic in the Rhine-Main area or in the greater Hamburg area, for example.

Warning

ATTENTION: not for children under 3 years