Serie Ae 3/6 II (SBB/CFF/FFS) | Gauge H0 - Article No. 37512

Double Electric Locomotive Set.

Prototype: Two Swiss Federal Railways (SBB/CFF/FFS) class Ae 3/6 II electric locomotives. One unit in an Era II version, the other in an Era III version.

/ c d P i T
Double Electric Locomotive Set.
Double Electric Locomotive Set.

Most Important Facts

Article No. 37512
Gauge / Design type H0 / 1:87
Era II+III
Kind Electric Locomotives
Article not produced anymore.
Check with your local dealer
Find Dealer

Highlights

  • High-efficiency propulsion.
  • fx decoder.
  • Swiss headlight / marker light changeover.
  • Separately applied grab irons.
  • Product description

    Model: Both locomotives come with an fx decoder and controlled high-efficiency propulsion. All 3 driving axles as well as both jackshafts are powered. 2 traction tires. The Swiss headlight / marker light code (triple headlights / white marker light) change over with the direction of travel, will work in conventional operation, and can be controlled digitally. The direct control (acceleration and braking delay) can be controlled with a Control Unit or with Märklin Systems.
    Locomotive 1 comes in an Era II version with the original brown paint scheme, engineer's cab doors on the ends of the locomotive, and separately applied walkover grab irons.
    Locomotive 2 comes in an Era III version with pine green paint scheme and prototypically sealed doors on the ends and without walkover grab irons.
    Length of each locomotive over the buffers 17.1 cm / 6-3/4".

    This double locomotive set is being offered by Trix (22344) for two-rail DC systems.

    Find more Märklin explanation videos on our YouTube Channel

    Spare parts for our articles can be found here in our spare parts search.

  • Publications

    - Summer New Items 2006
  • Prototype information

    A Sturdy Classic - The SBB placed the class Ae 3/6 II in operation from 1923 to 1926 chiefly for express and passenger train service in the Swiss midlands. The 4-6-2 wheel arrangement ("Pacific") and the use of side rod drive was the result of a focus on prototypes of the fading Swiss steam locomotive era. Viewed from this perspective, the Ae 3/6 II design was not exactly innovative. However, the 60 units built turned in good results and their almost proverbial reliability ensured them an extraordinarily long service life. Over the course of their long career these locomotives were adapted several times to new operational requirements. In addition to technical modifications, the changes were particularly noticeable on the outside of the locomotive when the side cab doors on the right side of the respective cabs at the front of the locomotive as well as the front doors on the ends of the locomotive were welded shut to reduce the considerable drafts into the locomotive. During a subsequent overhaul the ends were sealed completely because rust developed in the welding seams. The paint scheme on the locomotives also changed to reflect the design concepts in the various eras. Road number Ae 3/6 II 10439 has been rebuilt to a large extent to its original state, is painted brown again and even remains preserved as an operational museum locomotive to this day.

Warning

ATTENTION: not for children under 3 years