Gauge H0 - Article No. 70362

"Vr 0 / Vr 1" Distant Signal

"Vr 0 / Vr 1" Distant Signal
Article No. 70362
Gauge H0
Design type 1:87
Era ----------
Kind Signals
87,99 € RRP, incl. Tax
Article in stock.

Product description

The signal has a gray mast and a movable disk. The signal changes from yellow/yellow (Vr 0) to green/green (Vr 1).

Publications

- New items brochure 2018 - Product programme 2018/2019 - Product programme 2019/2020 - Product programme 2020/2021 - Product programme 2021/2022 - Product programme 2022/2023 - Product programme 2023/2024

Prototype information

Stop-and-Go on the Rails. Just like the real life prototype, signals fulfill important control and safety functions on a model railroad too. Märklin signals control rail traffic, because they not only show prototypical signal aspects, they also directly influence train movements. When set for stop, they switch the current off in the center conductor and the catenary in their area – the train remains stopped. For "go slow" or "go normally" they switch the current on – the train runs through or starts up again. If you want to be even more realistic, you set up distant signals at an appropriate distance. They are coupled to their home signals and display appropriate signal aspects. Semaphore/target signals can be controlled conventionally using the 72760 control box and in the digital system using the CS III+, CS III, CS II, MS II, CS I, or the 6040 Keyboard. These newly designed semaphore/target signals have the mfx, Motorola, and DCC digital formats. The mechanisms for these signals are servo drives. The speed of the semaphore / target movement can be programmed. The constant light source is done with LEDs. A below-baseboard mounting kit is included to have the signals look realistic on your layout.

Features

d Digital decoder with additional, digitally controlled functions (f1, f2, f3 or f4) when operated with the 6021 Control Unit. The functions present depend on how the locomotive is equipped. Standard function (function) active during conventional operation.
e Digital decoder with up to 32 digitally controlled functions. The quantity depends on the controller being used.
§ DCC decoder
3 Era 3
4 Era 4
Y ATTENTION: adults only

Warning

ATTENTION: adults only