Article No. | 60932 |
---|---|
Gauge | H0 |
Design type | 1:87 |
Era | ---------- |
Kind | Decoder |
For diesel locomotives. This kit is for converting Märklin H0 locomotives with built-in 6090, 60901, 60903, or 60904 high-efficiency propulsion to the new version with a feedback feature and sound effects. The existing high-efficiency motor is retained, the locomotive decoder is replaced, and a speaker is also installed. 12 typical diesel locomotive operating sound effects are pre-programmed and can be activated according to the table. The following special sound effects specific to the operation of the locomotive are present on this decoder: F7 = high pitched horn tone. F8 = low pitched horn tone. F9 = auxiliary diesel with constant rpm. F10 = sound of excess pressure safety valve letting off air. F13 = sound of doors being closed. F14 = startup of the motor. F15 = oil pump. Also available are controllable functions including direct control without acceleration/braking delay as well as 3 function outputs that can be assigned as desired, one of which changes over with the direction of travel. Circuit board dimensions 35 mm / 1-3/8" length x 15 mm / 9/16" width x 6 mm / 1/4" height. Speaker diameter 22 mm / 7/8", height 3 mm / 1/8".
Control Unit | Mobile Station | Mobile Station 2 | Central Station 1/2 | Central Station 3/2 | |
---|---|---|---|---|---|
On/off function F/R | X | X | X | X | X |
On/off function F1 | X | X | X | X | X |
On/off function F2 | X | X | X | X | X |
Diesel locomotive op. sounds | X | X | X | X | X |
Direct control | X | X | X | X | X |
Locomotive whistle | X | X | X | X | |
Whistle for switching maneuver | X | X | X | X | |
Horn blast 1 | X | X | X | X | |
Horn blast 2 | X | X | X | X | |
Operating sounds | X | X | X | ||
Operating Sounds 1 | X | X | X | ||
Letting off steam / air | X | X | X | ||
Sound of squealing brakes off | X | X | X | ||
Surrounding Sounds 1 | X | X | X | ||
Operating Sounds 2 | X | X | X | ||
Operating Sounds 3 | X | X | X |