E 60 | Gauge 1 - Article No. 55607

Class E 60 Electric Locomotive

Prototype: German Federal Railroad (DB) class E 60 as it looked in Era IIIb. Switch engine with cab windows as they originally looked in real life, without switching platforms, type SBS 10 pantograph, 2 DB design headlights, and 1 marker light at the ends. Green basic paint scheme. Road number E 60 08, based in Freilassing.

Class E 60 Electric Locomotive
Article No. 55607
Gauge 1
Kind Electric Locomotives
Article not produced anymore.


  • Highly detailed model with many separately applied parts.
  • Small electric DRB lanterns like the prototype.
  • Pantograph servomotorisch angetrieben (realistisch heb- und senkbar)
  • Pantograph powered by a servomotor (can be raised and lowered).
  • Remote-controlled Telex coupler front and rear.
  • High-tension cable leading into the cab.
  • Exactly detailed cab with interior details.
  • Steps constructed of textured sheet metal.
  • Cooling lines reproduced on all sides of the locomotive.
  • No rain gutter above the door.
  • Prototypical clamping shoes.
  • Upper marker light at each end that can be controlled separately.
  • Access hatches on the motor hood.
  • Propulsion prototypically by means of a jackshaft.

Product description

Model: The frame and locomotive body are constructed of metal. The locomotive has an mfx digital decoder, controlled high-efficiency propulsion, and extensive sound functions. It can be operated with AC power, DC power, Märklin Digital, or DCC. All of the driving axles are powered by means of a powerful centrally mounted motor. The type SBS 10 double-arm pantograph with a single contact strip can be raised and lowered in digital operation by means of a servomotor. The white dual headlights are LEDs. They will work in conventional operation, and can be controlled digitally. An upper marker light also comes on depending on the direction of travel. The cab has warm white LED lighting. The cab doors can be opened, there are interior details, and the cab has a figure of an engineer. The locomotive has metal grab irons and many other separately applied details: signs, antenna, windshield wipers, whistle, etc. The buffer beams have sprung buffers and separately applied brake lines. The locomotive has built-in, completely newly developed remote-controlled Telex couplers front and rear. The locomotive has factory-installed claw couplers that can be replaced by 2 prototype couplers included with the model. The locomotive has a high level of weight for good pulling power without traction tires. It also has extensive sound functions. Minimum radius for operation 1,020 mm / 40-3/16". Length over the buffers 35 cm / 13-3/4".

One-time series.


- Summer New Items 2017 - Product programme 2017/2018


) Metal frame and locomotive body.
e Digital decoder with up to 32 digitally controlled functions. The quantity depends on the controller being used.
§ DCC decoder
h Built-in sound effects circuit.
M Dual headlights and dual red marker lights that change over with the direction of travel.
k Built-in interior lighting.
j Built-in interior details.
V Locomotive / car has sprung buffers.
W Automatic claw couplers can be replaced with reproduction prototype couplers.
3 Era 3
Y ATTENTION: adults only


ATTENTION: adults only
Control Unit Mobile Station Mobile Station 2 Central Station 1/2 Central Station 3/2
Headlight(s) X X X X X
Pantograph control X X X X X
Electric locomotive op. sounds X X X X X
Locomotive whistle X X X X X
Interior lights X X X X X
Telex coupler on the front X X X X
Front Headlights off X X X X
Telex coupler on the rear X X X X
Rear Headlights off X X X X
Sound of squealing brakes off X X X
Direct control X X X
Bell X X X
Light(s) for Oncoming Train X X X
Letting off Air X X X
Operating sounds X X X
Whistle for switching maneuver X X X