70011 Mast Positioning Jig Set.

Tool for determining the position of regular and tower span masts and catenary wire lengths on curves. This set consists of 2 positioning jigs, 1 catenary branch-off jig, and 2 marking pens.
Highlight: Aid for installing catenary masts.

70012 Catenary Installation Jig.

Tool for determining the height and side position of the catenary wire. Can be adapted to all track systems. Package with 5 pieces.
Highlight: Aid for installing catenary wire.

70131 Cantenary Wire for Crossings.

Made of welded steel wire. Pre-finished unit for crossings and double slip switches with a crossing angle of 22.5° (examples: 2259, 2260) and 24.3° (examples: 24624, 24640). Length 140.2 mm / 5-1/2". 1 piece. 4 each of the 70231 adjustment sections required at the ends.
Highlight:
Catenary wires made of welded steel wire.
Surfaces galvanically treated.
Finished pieces, easy to install.

70142 Cantenary Wire.

Made of welded steel wire. Length 142.0 mm / 5-9/16". Designed for curved track with a radius of 360 mm / 14-3/16" (C Track, K Track, M Track). 16 pieces of catenary wire required for a circle, each piece with 22.5° of curvature. Package comes with 5 pieces.
Highlight:
Catenary wires made of welded steel wire.
Surfaces electroplated.
Finished pieces, easy to install.

70143 Catenary Transition Piece.

Made of welded steel wire. Length approximately 142.0 mm / 5-9/16". Designed for the transition from the old Märklin catenary to the new catenary system. Package comes with 3 pieces.

70167 Cantenary Wire.

Made of welded steel wire. Length 167.5 mm / 6-5/8". Designed for curved track with a radius of 424.6 mm / 16-11/16" (K Track). 16 pieces of catenary wire required for a circle, each piece with 22.5° of curvature. Package comes with 5 pieces.
Highlight:
Catenary wires made of welded steel wire.
Surfaces electroplated.
Finished pieces, easy to install.

70172 Cantenary Wire.

Made of welded steel wire. Length 172.5 mm / 6-13/16". Designed for curved track with a radius of 437.5 mm / 17-1/4" (C Track, M Track). 16 pieces of catenary wire required for a circle, each piece with 22.5° of curvature. Package comes with 5 pieces.
Highlight:
Catenary wires made of welded steel wire. Surfaces electroplated.
Finished pieces, easy to install.

70221 Catenary Wire Interrupter.

For a functional separation of the power circuit in the catenary. One end with the standard suspension, the other end with receptacle for a cut catenary wire with an open end. Precise length adjustment during installation. Package has 1 piece.
Highlight:
Catenary wires made of welded steel wire.
Surfaces electroplated.
Finished pieces, easy to install.

70231 Catenary Wire Adjustment Section.

For adjustment of individual track lengths. One end with the standard suspension, the other end with receptacle for a cut catenary wire with an open end. Precise length adjustment during installation. Package has 5 pieces.
Highlight:
Catenary wires made of welded steel wire.
Surfaces electroplated.
Finished pieces, easy to install.

70360 Cantenary Wire.

Made of welded steel wire. Length 360.0 mm / 14-3/16". Standard length. Designed for straight lengths of track. Package comes with 5 pieces.
Highlights:
Catenary wires made of welded steel wire.
Surfaces electroplated.
Finished pieces, easy to install.