48295 Heavy Duty Car.

Prototype: German Railroad, Inc. (DB Cargo) type Uai 839 "Schnabel" type transport car. Version with 32 axles. Large transformer with transport mounts.
Model: Metal "Schnabel" load arms and truck bolsters. Metal transformer, mounted with side play. Load can be removed. Load arms can be couple directly to one another. Center axles on the trucks are spring mounted. Many separately applied details. Length over the buffers 72.0 cm / 28-/38". DC wheel set 1 x Set 30 5268
One-time series
Important: The running gear geometry of this heavy duty car enables it to be run on normal track curves with a minimum radius of 360 mm / 14-3/16". Since the long load arms swing out very wide with the load, sufficient space is required within the track curve, and this space must be kept clear of masts, trees, or buildings. We recommend that you run this heavy car on well mounted track with the widest possible curves.

48484 Pressurized Gas Tank Car.

Prototype: Privately owned car painted and lettered for the firm Eisenbahn-Verkehrsmittel GmbH (Eva), used on the German Railroad, Inc. (DB AG). Used for "PiaNOx" from the firm SKW.
Model: Detailed partially open car frame. Separately applied details. Length over the buffers 18.0 cm / 7-1/16". DC wheel set 4 x 70 0580

48690 Track Scale Calibration Train Car Set.

Prototype: 2 calibration cars and 1 equipment car painted and lettered for the German Federal Railroad (DB). Cars uses a unit to text track scales.
Model: Calibration cars have a 3-axle frame, roof hatches that can be opened, and 8 each removable calibration weights. The cars come with different car numbers. Boxcar painted and lettered as a maintenance car. Total length over the buffers 26.8 cm / 10-9/16". DC wheel set 8 x 70 0580
Highlights:
Completely new tooling.
Hinged roof hatches can be opened.
Weight can be removed individually.

48770 Thermal Insulated Car.

Prototype: German Federal Railroad (DB) type G10. Special version with thermal insulation.
Model: Side walls are constructed of boards running horizontally. Fixed doors for the refrigeration area. Length over the buffers 10.6 cm / 4-3/16". DC wheel set 2 x 70 0580
A similar model will be offered by Trix (T24032) for two-rail DC systems.
Highlights:
New design as thermal insulated car.
Superstructure with lengthwise boards.

48807 Swiss Freight Car Set.

Prototype: 3 Swiss Federal Railways (SBB/CFF/FFS) freight cars. 1 type J3 boxcar, 1 type Eaos gondola, and 1 privately owned tank car for gasoline.
Model: The boxcar has sliding doors. The gondola has a load insert with a layer of real coal. The tank car has a detailed frame and separately applied platforms. Total length over the buffers 40.5 cm / 15-15/16". DC wheel sets 6 x 70 0580 2 x 60 1151
Highlight:
Goes well with the new 36330 switch engine.

49611 Diesel Locomotive for Multiple Unit Operation.

Prototype: Same as model 37611, but with road number 77L.
Model: Booster unit for real multiple unit operation with model 37611. High-efficiency motor, controlled from the decoder in the 37611 locomotive. 2 axles powered. 4 traction tires. Lights as well as acceleration and braking delay can be controlled from the decoder in the 37611 locomotive. Special coupling with multiple-pin electrical connections between the two locomotives. Close coupler in standard coupler pocket can be replaced by an American type coupler or by a cover. Length over the couplers 23.5 cm / 9-1/4".

The 49611 locomotive can only be operated in conjunction with a 37611 locomotive. The minimum required curve for operation is 360 mm / 14-3/16".

49952 Railroad Crane with Digital Functions Car Set.

Prototype: German Railroad, Inc. (DB AG) crane car train. "Goliath" 150 metric ton crane car, crane tender car and, counterweight car. Current version.
Model: Crane car comes with a metal 8-axle car frame and superstructure. Metal counter weights that can be mounted on the crane. Power supply, 3 motors, and special version digital decoder for remote control with the 6021 Control Unit. Superstructure with boom can be rotated on prototypical crown gear wheel. The boom can be raised and lowered with pulley and double block and tackle. Metal main hook can be raised and lowered with pulley and double block and tackle. 4 support arms can be swung out manually and can be fixed with spindles on the bases included with the crane car train. Length of the superstructure with boom and counterweights is a maximum of 34.0 cm / 13-3/8". Radius range of the hook is up to 21.0 cm / 8-1/4". On curves, the boom can swing to the side prototypically during transport. Crane tender car for supporting the boom, for storing the hooks and the support bases (stacks of ties). Counterweight car with special equipment for the transport and assembly of the counterweights. Total length over the buffers 55.0 cm / 21-5/8".

49962 Sound Effects Car for Locomotives.

Prototype: German Federal Railroad (DB) mail car. Schürzenwagen / skirted car design.
Model: Car comes with a digital decoder and sound effects generator for different operating sounds on steam locomotives. In addition to chuffing sounds that vary with the speed of the locomotive, different whistle tones and bells, pump, injector, steam chest, and other sounds are available. The decoder in this car can be set for the address of the locomotive to which the car is assigned. The different sound effects can be controlled digitally with the 60652 Mobile Control. Length over the buffers 26.3 cm / 10-3/8".
Highlights:
Working digital model.
Add-on for steam locomotives without their own sound effects circuit.
Steam locomotive operation sounds vary with the speed of the locomotive.
Additional sound effects that can be turned on: different whistles, different bells, pump, injector, steam chest, blowing off steam, and others.

49963 Rotary Snowplow as a Working Model.

Prototype: German State Railroad Company (DRG) rotary snowplow Dampf-Schneeschleuder der Deutschen Reichsbahn-Gesellschaft (DRG). Henschel design. With type 2´2´T 26 tender.
Model: Model comes with a digital decoder, powered blade wheel, and auxiliary functions. Metal superstructure. Separately applied handrails. Detailed reproduction of the front part of the plow. Side wings and guide blades can be adjusted. Work lights and headlights are illuminated. Unit can be retrofitted with the 7226 smoke generator. Smoke generator contact, work lights, steam engine sound effects, and blade wheel rotating to the right will work in conventional operation. These functions as well as the headlights, whistle, and blade wheel rotating to the left can be controlled digitally with the 6021 Control Unit. Length closed 24.2 cm / 9-1/2".


Highlights:
Working digital model.
Rotation of the rotary blade wheel.
Work lights.
Headlights.
Sound effects of the steam engine.
Steam whistle.

70000 Basic Catenary Assortment.

For equipping a track plan consisting of an oval with a passing siding as found in the larger starter sets.
Contents: 9 sections of wire 360 mm / 14-3/16" for straight lengths of track. 18 section of wire 142 mm / 5-9/16" for the standard curve. 6 sections of wire 167.5 mm / 6-5/8" for the parallel curve. 31 regular masts, 1 feeder mast. The masts come with outrigger arms, base, and clip for C Track. 1 mast positioning jig set. 1 assembly jig for the catenary wire. Instructions with a description of the system and with tips for setup.
Highlights:
New catenary system.
Complete for the track layout from the current starter sets.
Easy setup, even for temporary layouts.
Clip on the masts - hand the wires - connect the catenary to the transformer or digital controller.
No bending and no stretching of the catenary wires.