48404 HO Christmas Car for 2004

This Reindeer sleigh transporter also offers the possibility of combined transportation for Santa Claus' vehicle. After several acoustic specialties, this festive "piggyback" car continues the series of Christmas cars this year.

Prototype: Type X05 "Erfurt" low side car with brakeman's cab.
Model: Painted and lettered as a "Rolling Sleigh Run" with Christmas themes. Car frame has truss rods and open buffers. Close couplers with guide mechanism. Christmas reindeer sleigh with a figure of Santa Claus included. Length over buffers 11.6 cm/4-9/16".

DC wheel sets 2 x 700580
One-time series

80614 Z Gauge Christmas Car for 2004

This Christmas car comes in a clear star ornament with a diameter of approximately 100 mm/4". The star ornament can be hung on a Christmas tree and continues the series of festive themes from previous years.

Prototype: Refrigerator car with a brakeman's cab, older design. Used starting in Era I.
Model: Old-timer car with a Christmas design. The theme shows a moving manager scene. Length over the buffers 40 mm/1-9/16".

One-time series

81522 Christmas Fun Starter Set with Battery Controller

Prototype: German Federal Railroad (DB) class 89 tank locomotive and one refrigerator car.
Model: Locomotive with 5-pole motor. Split axle. All drive axles are powered. Locomotive and freight cars in festive design. Length over buffers 102 mm/4-1/32". Contents: Oval of track consisting of 8 curved tracks and 2 straight tracks with connections. Layout size 357 x 302 mm/14-1/16" x 11-7/8". Battery controller with connecting cable (9 volt battery not included.)

37022 HO Digital DRG cl 53 K Steam Locomotive with Tender

Prototype: German State Railroad Company (DRG) intended as class 53.0 heavy freight locomotive with tender, based on a 1943 design from Borsig. Long-distance version with large condensation tender. Photo gray paint scheme.
Model: With digital decoder, controlled high-efficiency propulsion, mechanism for colling fans in the tender, and sound effects generator with many functions. 4 powered axles. 4 traction tires. 2 #7226 smoke generators can be retrofitted. Headlight, smoke generator contact and fan coller wheels in conventional operation. These functions, speed-dependent steam locomotive sound effects, as well as acceleration and braking delay can be digitally controlled with the 6021 Control Unit. Additional operating sound effects can be digitally controlled with the 60652 Mobile Station and with the 60212 Central Station. Locomotive and tender with NEM coupler pockets. Distance between locomotive and tender can be adjusted. Length over buffers 35.5 cm/13-32/32".

One-time series

42750 HO Express Train Passenger Car Set

Prototype: 4 German Federal Railroad (DB) stadard cars. German State Railroad design group 28 and 30. One A4yse-30/55 1st class car. Two B4üwe 28/51 2nd class cars, and one Pw4ü-30 baggage car with roof cupola.
Model: Different road numbers. Printed train destination signs. Roofs with traces of soot suggested. Total length over buffers 97.5 cm/38-3/8".

DC wheel set 16 x 700580

72881 HO Locomotive Shed Kit

Prototype: Three-stall brickwork locomotive roundhouse. Early 20th century construction style In use until current museum operation.
Model: Each place arranged at a 15° angle. Works well with 7286 Turntable. Suitable for C Track and K Track (track not included). 30 cm/11-13/16" inside usable track length. Gates close automatically when the locomotives enter. Lighting set with maintenance-free LED. Workshop interior detailing.

Highlights:
New tooling.
Also suitable for HO 2-rail DC systems
Interior details with lighting

00781 Caterpillar Construction Equipment for HO

Caterpillar models in HO scale add realism to your layout. 18871, 18872, 18873 and 18874 are come individually packaged. These construction models are made of metal with plastic parts.

24088 C Feeder Track for HO

For connecting a transformer and up to 2 Mobile Stations. Length 188.3 mm/7-13/32".

60111 Connection Box for 1 Gauge Layouts

For connecting a transformer and up to 2 Mobile Stations on a 1 Gauge layout.

60115 Connection Box for HO

For C Track and K Track. For connecting a transformer and up to 2 Mobile Stations on a HO layout.

60921 mfx High-Efficiency Propulsion Set

Consisting of mfx decoder and high-performance motor as well as installation material for converting most older Märklin H0 locomotives with drum commutator motors to current high-efficiency propulsion.

The electronic circuit has a total of 4 switchable functions. The "function" output is intended for lighting. Outputs "f1" and "f2" can be used for other switching processes, for instance telex coupler or smoke generator. The "f4" function enables shutting-off the control for easier switching. The additional functions are only switchable via Mobile Station, Central Station, or via the Control Unit (or a Control 80f locomotive controller).

Once installed, the electronic circuit automatically links to the Mobile Station or to the Central Station. It offers the possibility of changing the maximum speed, the acceleration rate, as well as the braking delay. Motor control at different load conditions, e.g. ascending and descending. Can be adjusted with "spoken" names (road number, locomotive designation, etc.), or up to 80 different two-digit digital addresses. The "function" and "f1" functions are switched on in AC operation.

60922 mfx High-Performance Electronic Circuit

High-performance decoder for converting Märklin H0 locomotives with built-in 6090, 60901, 60903 and 60904 high-efficiency propulsion to the new version with acknowledgement.

The electronic circuit has a total of 4 switchable functions. The "function" output is intended for lighting. Outputs "f1" and "f2" can be used for other switching processes, for instance telex coupler or smoke generator. The "f4" function enables shutting-off the control for easier switching. The additional functions are only switchable via Mobile Station, Central Station, or via the Control Unit (or a Control 80f locomotive controller).

Once installed, the electronic circuit automatically links to the Mobile Station or to the Central Station. It offers the possibility of changing the maximum speed, the acceleration rate, as well as the braking delay. Motor control at different load conditions, e.g. ascending and descending. Can be adjusted with "spoken" names (road number, locomotive designation, etc.), or up to 80 different two-digit digital addresses. The "function" and "f1" functions are switched on in AC operation.

60923 mfx High-Efficiency Propulsion Set

Consisting of mfx decoder and high-performance motor as well as installation material for converting certain older Märklin H0 locomotives with smaller design flat commutator motors to current high-efficiency propulsion.

The electronic circuit has a total of 4 switchable functions. The "function" output is intended for lighting. Outputs "f1" and "f2" can be used for other switching processes, for instance telex coupler or smoke generator. The "f4" function enables shutting-off the control for easier switching. The additional functions are only switchable via Mobile Station, Central Station, or via the Control Unit (or a Control 80f locomotive controller).

Once installed, the electronic circuit automatically links to the Mobile Station or to the Central Station. It offers the possibility of changing the maximum speed, the acceleration rate, as well as the braking delay. Motor control at different load conditions, e.g. ascending and descending. Can be adjusted with "spoken" names (road number, locomotive designation, etc.), or up to 80 different two-digit digital addresses. The "function" and "f1" functions are switched on in AC operation.

60924 mfx High-Efficiency Propulsion Set

Consisting of mfx locomotive decoder and high-performance motor as well as installation material for converting certain older Märklin H0 locomotives with smaller design flat commutator motors to current high-efficiency propulsion.

The electronic circuit has a total of 4 switchable functions. The "function" output is intended for lighting. Outputs "f1" and "f2" can be used for other switching processes, for instance telex coupler or smoke generator. The "f4" function enables shutting-off the control for easier switching. The additional functions are only switchable via Mobile Station, Central Station, or via the Control Unit (or a Control 80f locomotive controller).

Once installed, the electronic circuit automatically links to the Mobile Station or to the Central Station. It offers the possibility of changing the maximum speed, the acceleration rate, as well as the braking delay. Motor control at different load conditions, e.g. ascending and descending. Can be adjusted with "spoken" names (road number, locomotive designation, etc.), or up to 80 different two-digit digital addresses. The "function" and "f1" functions are switched on in AC operation.

72090 Distribution Strip

With 12 electrically linked connections. 11 miniature sockets for standard plugs. 1 socket for older plugs. 47 x 26 mm/1-27/32" x 1-1/32".

07459 Track Plan Book - C Track (German Text)

25 different H0 track plans are presented in detail for layouts larger than approximately 3 meters/10 feet. Primarily the layouts are planned for the C Track system. However, all track plans are also presented as a pure track plan with parts lists for the K Track system. The book features 3 fold-out tables for scale representation of the large layouts. 154 pages in horizontal format 29.7 x 21 cm/11.7" x 8.27". German text only.

00900 1 Gauge Working Display with Class 01 Express Locomotive with Tender

Prototype: German Federal Railroad (DB) class 01. Version with old boiler, front fairing, and Witte smoke deflectors.
Model: Body and frame are mostly diecast metal. Engineer's cab and separately applied parts are made of plastic. 3 axles powered. Digital high efficiency propulsion.
Includes:
59931 Roller test stand for 1 Gauge with 6 roller block pairs. Version made of anodized aluminum profile. Roller block pairs with precision ball bearings. 1 Gauge track. Locomotive is operated with 6647 Transformer or 6021 Control Unit. Length 850 mm/33-15/32". Useable length approx. 790 mm/31-3/32".
59970 Display Case. Presentation display case. Wooden base with high quality acrylic glass cover. Ready for installation of feeder wires for power. Suitable for locomotives, cars and models up to a length of approx. 85 cm/33-7/16".