#54105 "Mail Traffic" Train Set

Prototype: German Federal Postal Service class 260 diesel switch engine. Model: Train set consists of a three-axle switch engine and 2 different freight cars. Locomotive features: Three-axle design. All axles powered through the side rods. Center axle equipped with 2 traction tires. Diecast zinc body. Built-in digital high-efficiency propulsion for operation with AC power, DC power or with Märklin DELTA/Digital. Adjustable maximum speed. Adjustable acceleration / braking delay. Built-in TELEX couplers front and rear for automatic uncoupling of cars coupled to the locomotive. These couplers cannot be activated in operation with DC power. Doors that can be opened. Car features: One each two-axle boxcar and a low side car with a container as a load. Sliding doors on the sides of the boxcar that can be opened. Walls on the sides of the low side car are removable. Container can be removed from the low side car. Doors that can be opened at one end of the container. An assortment of items for play value including play postage stamps, an ink stamp with an ink pad as well as cardboard box flats supplement this set. Locomotive and cars are not available separately in this version. Minimum radius required for operation 600 mm / 23-5/8". Train length 90.5 cm / 35-5/8".

#54106 "Swiss Ski Express" Train Set.

Model: Train set consists of a three-axle tank locomotive and 2 passenger cars. Locomotive features: Three-axle design. All axles powered through side rods. Center axle equipped with 2 traction tires. Diecast zinc body. Built-in digital high-efficiency propulsion for operation with AC power, DC power or with Märklin DELTA/Digital. Adjustable maximum speed. Adjustable acceleration / braking delay. Built-in sound effects circuit that reproduces the operating sounds of a steam locomotive; these sounds vary with the speed of the locomotive. Built-in smoke generator that can be turned on and off in digital operation with the locomotive controller. In conventional operation the smoke generator can be turned on and off with a switch in the cab. Car features: 2 passenger cars with different lettering. Doors on the ends that can be opened. Removable roof. Both cars have a ski rack on one side. 10 pairs of skis in 1:32 scale included. Locomotive and cars are not available separately in this version. Minimum radius required for operation 600 mm / 23-5/8". Train length 84.5 cm / 33-1/4".

#54561 Heavy Locomotive with Tender

Prototype: German Federal Railroad (DB) class 18.4 express locomotive. Model: Express locomotive model with 3 axles powered directly or through side rods, built-in sound effects circuit and built-in smoke generator. Built-in universal electronic circuit for operation with AC power, DC power, or Märklin DELTA/Digital. Smoke generator can be turned on and off in conventional operation with a switch in the cab. Sound effects vary with the speed of the driving axles. Ready for installation of digital high-efficiency propulsion and digital sound effects circuit from the standard 1 Gauge program. A figure of an engineer and of a fireman included with the locomotive. Minimum radius required for operation 1,020 mm / 40-5/32". Length over buffers approximately 67.0 cm / 26-3/8".

#54962 Tank Car

Model:Two-axle car with brakeman's platform. Outer metal tank. Inner plastic liner can be filled through a hatch on the rop and can be empited froma valve o nthe bottom. Not suitable for any liquieds to be cosumed. Separately appliedt ladder and catwalk with railing. Solid wheels. Minimum radius for operation 600 mm / 23-5/8". Length over buffers 27.5 cm / 10-13/16".

#54507 Tank Locomotive

Prototype: German Federal Railroad (DB) class 8970-75. Model: Three-axle model with built-in digital high-efficiency propulsion, smoke generator and sound effects circuit. Can be operated with AC power, DC power, or Märklin DELTA/Digital. Smoke generator can be turned on and off in conventional operation with a switch in the cab. In digital operation the smoke generator can also be turned on and off from the 6021 Control Unit or from a Control 80 f connected to the latter. All 3 axles powered directly or through side rods. 1 axle is equipped with traction tires. Sound effects circuit turned on permanently and these operating sounds of the locomotive vary with its speed. The headlights change over with the direction of travel and can be turned on and off in digital operation. In conventional operation the headlights are on when the locomotive is in motion and their brightness varies with the speed of the locomotive. Minimum radius required for operation 600 mm / 23-5/8". Length over buffers 26.8 cm / 10-9/16".

#54836 Boxcar with Sound Effects Module

Model: Two-axle boxcar with sliding doors on the sides that can be opened. Built-in bracket for a sound effects module. This sound effects module reproduces the sounds of glass shattering, when the train is braked suddenly or when this car is in a collision. The sound effects module is powered by a built-in battery. Minimum radius for operation is 600 mm / 23-5/8". Length over buffers 27.5 cm / 10-13/16".

#54771 Refrigerator Car

Model: Two-axle freight car lettered with advertising. Plastic frame. Metal body. Plastic roof. Comes with sprung buffers. Reproduction of vents on the roof. Sold wheels. Multi-color imprinting. Minimum radius for operation is 600 mm / 23-5/8". Length over buffers 31.5 cm / 12-3/8".

#54807 Low Side Car with Load

Model: Two-axle low side car with removable side walls. Loaded with a 1:32 scale truck made of metal and plastic. The box body for the truck has doors on the back that can be opened. The front wheels on the truck can be set in different steering positions. The truck model in this version is only available with this model. Minimum radius for operation is 600 mm / 23-5/8". Length over buffers 27.5 cm / 10-13/16".

#54762 Container Transport Car with Load

Prototype: Four-axle piggyback car lettered for the Swiss firm HUPAC. Model: Four-axle freight car for transporting up to two containers. Model comes with 2 removable containers. Doors at one end of both containers that can be opened. Brake wheel on both sides of the car. Minimum radius for operation is 600 mm / 23-5/8". Length over buffers 44.0 cm / 17-5/16".

#54901 Tank Car

Model: Four-axle tank car. Two-part tank design consisting of an outer metal tank and an inner plastic liner. The tank car can be filled through a hatch on the top and can be emptied from a valve on the bottom. Not suitable for any liquids to be consumed. Tank capacity is over 500 cubic centimeters / 1 pint. Minimum radius for operation is 600 mm / 23-5/8". Total length 33.2 cm / 13-1/16".

#54921 Stock Car

Model: Four-axle car for transporting livestock. Sliding doors on the sides that can be opened. Equipped with typical details such as ladders, brake wheels, etc. Minimum radius for operation is 600 mm / 23-5/8". Total length 36.0 cm / 14-3/16".